Hello everybody,
I am looking for a BAZ with the following criteria:
3 axis
Traverse path in X min 1000
Traverse path Y min 1000
IKZ
Tool changer
chip conveyor
Heidenhain control system.
I don’t have a particular manufacturer in mind yet however I prefer German manufacturers.
The old Deckel DMU 80T was ideal but the traverse paths are getting to small now.
What machines can you recommend me?
Many thanks in advance
Hello everybody,
I am looking for a BAZ with the following criteria:
3 axis
Traverse path in X min 1000
Traverse path Y min 1000
IKZ
Tool changer
chip conveyor
Heidenhain control system.
I don’t have a particular manufacturer in mind yet however I prefer German manufacturers.
The old Deckel DMU 80T was ideal but the traverse paths are getting to small now.
What machines can you recommend me?
Many thanks in advance
<!--coloro:#0000FF--><span style="color:#0000FF"><!--/coloro-->Der Vorteil der Klugheit besteht darin, daß man sich dumm stellen kann.<br />Das Gegenteil ist schon schwieriger.<br />Kurt Tucholsky <!--colorc--></span><!--/colorc--><br /><br />GRUß<br /><br />HOLZSCHNELLER CHRISTIAN<br /><br />Mori Seiki <!--coloro:#FF0000--><span style="color:#FF0000"><!--/coloro-->NV5000 ?1B/40<!--colorc--></span><!--/colorc--> // <!--coloro:#FF0000--><span style="color:#FF0000"><!--/coloro-->NMV5000<!--colorc--></span><!--/colorc-->// hyperMILL// HSMWorks // Fanuc 31iA5
Hello
We have two Hedelius machines RS60K. They seem quite solid. The oldest ones is from ’09. Have a look on their website.
The C100 drives in X-2500mm and Y-1000mm. They come from Mappen
Good luck
Matthias
Well already have an eye on the Hermle C1200, however with 900mm in Y it is close to the border.
The Hedelius is crossed out-with 2500 in x it’s a bit oversized.
Maybe there are any other alternatives?
Best regards
Posting Permissions
Reply with Quote