Manual guide for CT 40 with EPL2

Results 1 to 7 of 7

Thread: Manual guide for CT 40 with EPL2

  1. #1
    Konstro's Avatar
    Join Date
    May 2008
    Location
    Hann. Münden
    Posts
    551
    Downloads
    0
    Uploads
    0

    Default

    Hi
    Who could supply a manual guide for CT 40, year of manufacture 86, with EPL 2?

    I need it privately. For exercises.



  2. #2
    BFX20001's Avatar
    Join Date
    Jan 2008
    Location
    Nürnberg
    Posts
    221
    Downloads
    0
    Uploads
    0

    Default

    Unfortunately I don’t have any manuals. But if you have questions about EPL2, I’ll be glad to help.

    Greetings

    PS. I learned at CT40 ELP2. I like it more than the modern enhancements alias IP Plus…

    Greetings

    Bfxx



  3. #3
    Konstro's Avatar
    Join Date
    May 2008
    Location
    Hann. Münden
    Posts
    551
    Downloads
    0
    Uploads
    0

    Default

    How can I adjust tools?



  4. #4
    BFX20001's Avatar
    Join Date
    Jan 2008
    Location
    Nürnberg
    Posts
    221
    Downloads
    0
    Uploads
    0

    Default

    Operation mode manual controlling…

    Turn the diameter manually…

    Setup and then measure the tool and input the X value.

    The same in Z

    You can also call the parameters

    1001 is T1
    1002 is T2
    etc…

    There you can enter all data like cutting angle, color for graphic etc.

    Do you have CT40 at home?



  5. #5
    Konstro's Avatar
    Join Date
    May 2008
    Location
    Hann. Münden
    Posts
    551
    Downloads
    0
    Uploads
    0

    Default

    Exactly, I have one since yesterday.

    I bought it as a restored one and I’d like to apply it now for model making.

    What do you mean? I have to calibrate a tool first! For example T1 rougher.

    I also have a borer at t2 and t3!
    So how should I engage them all? Can I calibrate them among each other?



  6. #6
    BFX20001's Avatar
    Join Date
    Jan 2008
    Location
    Nürnberg
    Posts
    221
    Downloads
    0
    Uploads
    0

    Default

    CT 40 is a good machine.

    I would start with T2 as a base tool…
    The EPL2 is actually self-explanatory…

    As previously mentioned, operation mode key, then choose manual controlling, setup mode. Then there’re 2 possibilities. You can use base tool. I would rather use T2 therefore. And the others as following tools. There’re different options in the box, like keyboard 1-9…

    Greetings BF



  7. #7
    Member
    Join Date
    Aug 2016
    Location
    Bosnia And Herzegovina
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Manual guide for CT 40 with EPL2

    Hi,
    does anyone have postprocessor for epl2, please?



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Manual guide for CT 40 with EPL2

Manual guide for CT 40 with EPL2