Hello,
I have attached a post that we did for a Centroid control, should be OK for your machine.
IMPORTING POSTS
Having received a new or modified post processor, you will need to import it.
To do this double click the PartMaster Post Processor icon from your desktop, from the top toolbar choose Import
and browse to the folder where the modified post processor was saved.
When the file has been imported you will see the contents in the display area, next choose Compile from the top toolbar to create the .ppx file.
The new post-processor is now ready for use. Close the post-processor by using File > Exit.
When you next run DCAM or DWES the post processor will appear in the drop down list along with all original posts.
Regards
Andre