Centroid Post Processor


Results 1 to 3 of 3

Thread: Centroid Post Processor

  1. #1
    Registered
    Join Date
    Aug 2004
    Location
    Arizona-USA
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Centroid Post Processor

    I am using V14. The Centroid PP (milling) that was supplied doesn't put in any M8/M9 codes when requested. Is there a way to get a Centroid PP that will utilize cooling M-codes (M8/M9)? I emailed Dolphin-USA but it has fallen on deaf ears.
    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    UK
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: Centroid Post Processor

    Hello,

    If you let me know which one of the Centroid posts you are using I will get it fixed.

    On a more general note. Please use these contact details info@dolphincadcam.com

    ATB
    Andre

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Aug 2004
    Location
    Arizona-USA
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: Centroid Post Processor

    Thank you Andre. There was only one Centroid PP. It should be attached. replace the .doc extension with .ppr.

    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Centroid Post Processor

Centroid Post Processor