Need Help! Will not single block when running simulation.


Results 1 to 5 of 5

Thread: Will not single block when running simulation.

  1. #1
    Member
    Join Date
    Jul 2008
    Location
    USA
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Will not single block when running simulation.

    Hi,
    Need help with why it will not let me single block my tool path when I run the simulation. It is just a profile cut. PartMaster Milling & Turning V14.6.2017.3


    I am not using the 3d simulation just the normal run in the lathe module.

    Thanks, machineitright

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    UK
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: Will not single block when running simulation.

    Hello,

    I'll look into it.

    Andre

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Member
    Join Date
    Jul 2008
    Location
    USA
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Re: Will not single block when running simulation.

    Thanks Andre,

    Do you need my file?

    - - - Updated - - -

    Thanks Andre,

    Do you need my file?



  4. #4
    Member
    Join Date
    Feb 2007
    Location
    UK
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: Will not single block when running simulation.

    Hello,

    sorry for the delay in getting back to you, I overlooked this.

    Single step will just show a single operation not the whole program, so this is working as expected.

    To see the individual moves you need to use Pause mode, then hit Run and then from the right hand status panel you will see a flashing red button, click this to see each move.

    Click Stop to reset back to normal run mode.

    ATb
    Andre

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #5
    Member
    Join Date
    Feb 2007
    Location
    UK
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: Will not single block when running simulation.

    Oops !

    One thing I forgot to mention is the for Pause to work – the tool view must be set to Animate or Envelope

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Will not single block when running simulation.

Will not single block when running simulation.