Mach4 post processor recommendation


Results 1 to 2 of 2

Thread: Mach4 post processor recommendation

  1. #1
    Member
    Join Date
    Aug 2008
    Location
    Canada
    Posts
    303
    Downloads
    1
    Uploads
    0

    Default Mach4 post processor recommendation

    Good morning:

    I’ve been using Dolphin Cad for a number of years for drawing, but have not used the Cam portion. Recently I got a CNC router with Mach4, but I’m confused as to which post processor to use. None of the ones listed mention Mach4. I believe the g-code needs a .tap file extension, but not sure if another extension will work.
    Thanks

    Similar Threads:
    The one that dies with the most tools, WINS !


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    UK
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default Re: Mach4 post processor recommendation

    Hello,

    You can use the MACH3 posts for MACH4 - they all work OK

    Regards
    Andre

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mach4 post processor recommendation

Mach4 post processor recommendation