problem in MORI SEIKI SL-0

[metoaly]

Dear Sir,
I've a used CNC Lathe machine ( MORI SEIKI SL-0 ) with Fanuc 0 Controller. When the machine power on it's working and no alarms appears no messages , but axes does not move. all voltages in motherboard # A16B-1010-0040/080 ( +15v , -15v ,+5v , +24v ) are OK, enable LED lights up green , No.1 appear in alarm display segment. please help me to find a problem and repair it.
Please accept my sincere respect.
ASHRAF SAYED
ashraf_a_akda@yahoo.com

Similar Threads:

• Need Help!- Mori Seiki SL-65 tailstock problem
• Need Help!- mori seiki FL-2 problem
• Need Help!- SL-25B Mori Seiki Lathe Spindle Problem
• Threading problem on Mori seiki zl-15smc
• Mori Seiki ZL-15 Startup problem???

[cafetux]

Dear Sir,
I've a used CNC Lathe machine ( MORI SEIKI SL-0 ) with Fanuc 0 Controller. When the machine power on it's working and no alarms appears no messages , but axes does not move. all voltages in motherboard # A16B-1010-0040/080 ( +15v , -15v ,+5v , +24v ) are OK, enable LED lights up green , No.1 appear in alarm display segment. please help me to find a problem and repair it.
Please accept my sincere respect.
ASHRAF SAYED
ashraf_a_akda@yahoo.com

Hello, I currently have the same problem. I see that nobody answered you, could you solve it? Do you think I can help me?