Wabeco PC F020-2 & PC D020-2 software issue


Results 1 to 2 of 2

Thread: Wabeco PC F020-2 & PC D020-2 software issue

  1. #1
    Member
    Join Date
    Jan 2015
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Wabeco PC F020-2 & PC D020-2 software issue

    I have acquired two CNC machines produced by Wabeco, markeded by SL-Automatisierungstechnik GmbH and controlled by software EXSL-WIN

    I was able to control PC F020-2 (milling machine) with EXSL-WIN version 9.232.32.07
    However, I'm not able to control PC D020-2 (lathe) - there is no profile for turning / and there is no connection to the control board.

    I think controllers are from Heidenhain TNC 410, but I'm not sure. There is no markings on PCB.

    Is there any other software that can control those machines? Maybe nccad 9?
    Is there a way to get a newer version of EXSL-WIN with turning profile?



  2. #2
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default Re: Wabeco PC F020-2 & PC D020-2 software issue

    I would strongly advise that if you need to do any mods to the controller you do them to accept anything but NCCAD, it's awful to use.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Wabeco PC F020-2 & PC D020-2 software issue

Wabeco PC F020-2 & PC D020-2 software issue