Problem Tosnuc 600 serial port


Results 1 to 2 of 2

Thread: Tosnuc 600 serial port

  1. #1
    Member CNCSurtr's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Question Tosnuc 600 serial port

    Hello guys

    Im trying to dump some programs from my Tosnuc 600m into my computer to free up some space to load it with new programs. Im using DNC4U but I cant make it work. Im using DNC4U wizard to set it up and when it asks me to send a file from cnc to pc, it wont dump any information and machine doesnt get any alarm. I dont know what is the problem. Im using a null modem cable and I already tried playing with different parameters (baud rate, parity....). Cant find accurate parameter settings on machine manual nor can find it in control.

    Any ideas?

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2012
    Location
    USA
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Re: Tosnuc 600 serial port

    Hi,

    Try to enable hardware flow control and set the "DTR" signal high.

    AGG Software. DNC Precision and CNC Syntax Editor software.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tosnuc 600 serial port

Tosnuc 600 serial port