Hi,
Try to enable hardware flow control and set the "DTR" signal high.
Hello guys
Im trying to dump some programs from my Tosnuc 600m into my computer to free up some space to load it with new programs. Im using DNC4U but I cant make it work. Im using DNC4U wizard to set it up and when it asks me to send a file from cnc to pc, it wont dump any information and machine doesnt get any alarm. I dont know what is the problem. Im using a null modem cable and I already tried playing with different parameters (baud rate, parity....). Cant find accurate parameter settings on machine manual nor can find it in control.
Any ideas?
Similar Threads:
Hi,
Try to enable hardware flow control and set the "DTR" signal high.
AGG Software. DNC Precision and CNC Syntax Editor software.