Osai 10/510, computer does not connect to the controller.

[Angelradu]

Check Google "disk cloning" example EaseUs - remove your old HDD form Osai 10 and insert it into a PC with "EaseUS" also add your new hdd on the same pc then clone it. !!!! if you don't know how to do it, just exercise with something else, you on t want to lose your data

[mnichu55]

hello
i have problem with osai cnc
my faul is F0202
i cant find that fault
can anybody have the fault list????

[Treeman77]

Hello It looks like this is a popular subject however I have a cnc router and am not able to connect the software to the machine I used cnc usb software and can manually move the machine with the computer but it's old software and I'm not able to update it. I tried downloading new software but it doesn't connect to my USB software and doesn't detect machine. I greatly appreciate help with this issue.

- - - Updated - - -

Hello It looks like this is a popular subject however I have a cnc router and am not able to connect the software to the machine I used cnc usb software and can manually move the machine with the computer but it's old software and I'm not able to update it. I tried downloading new software but it doesn't connect to my USB software and doesn't detect machine. I greatly appreciate help with this issue.