Question about DMB4250 breakout board

[ecdez]

I'm retrofitting a machine using 86M DHT motors, DYN4 drives and a DMB4250 breakout board. I have a question about the board. According to one video (see below at the 1:47 mark) it says the board needs 24v DC but page 7 of the manual (https://www.dmm-tech.com/Files/DMB42...tVer010106.pdf) seems to suggest 48v DC or 120v AC. I don't want to fry the board; can anyone confirm what voltage is required?

Thanks,
Corey






Similar Threads:

• Newbie- Software & Breakout board question
• breakout board question
• breakout board question
• breakout board 200khz option question
• Question PMinMo Breakout Board

[Jmhx2]

48VDC power supply, the 120vac is the input to the power supply.

[ecdez]

48VDC power supply, the 120vac is the input to the power supply.

HAHA! Now I see it. I'm a dummy.

Thanks!!