A Desktop CNC by David A

[davida1234]

.

Has standard JST connectors out in the back.

[davida1234]

.

Connect the matching tail from underneath the electrical box.

[davida1234]

.


And wire to the VFD.

[davida1234]

.


Set PD070 to 0.
Set PD002 to 1

Clip with elevated sound.

[davida1234]

Peter, yes, it is pudding time I guess.

Will change to lower gearing for metal cutting. Waiting for new belts.....

[davida1234]

.

Wow, what a bummer.
So I slip couple of steps, can't move my leg, get transported to the ER, and within a few hours, I have a shiny new titanium hip joint.
Fortunately, recovery seems to go well......

[peteeng]

Hi David - Get well soonest ! Now you need to make titanium machine parts to match your hip. Peter

[davida1234]

.

I know, right?

Unfortunately, I am afraid the cable chains on the machine might not be up to the task.