longest tool bits you can use


Results 1 to 2 of 2

Thread: longest tool bits you can use

  1. #1
    Member
    Join Date
    Mar 2015
    Posts
    97
    Downloads
    0
    Uploads
    0

    Default longest tool bits you can use

    trying to figure out a few problems here

    if i am cutting into 200mm thick soft wood which is my maximum cutting height and cutting 3d that goes up to 150mm deep then that means the z axis plate and spindle is going to hit the material. i can counter act this by using longer tool bits and having the spindle lower. what is the longest tool bit you can get for 3d carving? i know a strong rigid machine is needed and strong motors.

    thanks

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5124
    Downloads
    0
    Uploads
    0

    Default Re: longest tool bits you can use

    Harvey tool is one source https://www.harveytool.com/products/...ra-long-length

    They have long end mills in all shapes and sizes.

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

longest tool bits you can use

longest tool bits you can use

longest tool bits you can use