David A's Benchtop CNC Version 2

[davida1234]

.
.
.
.
VACUUM HOLDING SET INSTALLATION:
.
.
Machine bed already contains all the channels and holes for
vacuum holding so just a manifold needs to be installed:



Manifold will be installed in this area under the machine bed:



Screw on the manifold to the underside:



Attach the standard Schedule 40 elbow to the manifold.
It can be oriented in any direction to match the vacuum pump location:



Overall layout of the vacuum holding system:



Vacuum holding set installation is finished.

A single piece of 1/4" MDF sheet on top of the machine bed to be provided by customer.

[davida1234]

.
.
.
bryggacnc website has been updated with the vacuum holding set page.

[davida1234]

Hi guys,

I will be out of the country for business for a while and won't be able to work on the machine during that time.
I will be following CNC Zone on the computer, though.

David