Is your machine leveled out? If it's going uphill in one direction, that would account for the stalling, if the power was marginal in the first place.
Hi all. I have a diy router with twin screw on the x axis. When I move in the negative direction all is fine, but when I move positive the axis stalls. The axis is belt driven by one motor. I have removed the belt and the motor moves both ways perfectly so its not an electrical issue, and I can move the axis by hand along its whole travel easily. I have made sure the screws are both tight and can find no play anywhere. Please help
Similar Threads:
Is your machine leveled out? If it's going uphill in one direction, that would account for the stalling, if the power was marginal in the first place.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]