Mounting my CNC on a 4 post lift


Results 1 to 3 of 3

Thread: Mounting my CNC on a 4 post lift

  1. #1
    Member
    Join Date
    Jun 2008
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Mounting my CNC on a 4 post lift

    Like many of us, I am trying to figure out creative ways to reclaim space that the CNC is going to use. One thought has been to mount the CNC (4x8 Avid) onto a standard automotive 4 post lift. I already have one on one side of the garage that works great which brought the idea to mind.

    Is there anything that I should consider that would make this a bad idea?

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default Re: Mounting my CNC on a 4 post lift

    I can tell you that I wouldn't trust it to be rigid enough.

    I don't know anything about the Avid's though.



  3. #3
    Member
    Join Date
    Jun 2008
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Mounting my CNC on a 4 post lift

    That was my primary concern. Just for reference, this is what I am referring to for the lift.





Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mounting my CNC on a 4 post lift

Mounting my CNC on a 4 post lift

Mounting my CNC on a 4 post lift