Reply with QuoteGood luck with the project-please document your progress here as it may encourage others to do the same.
DIY ATC add on for 6040 or custom made??
Hi there, does anyone know of an aftermarket ATC spindle to add on to an existing machine?
Running a Chinese 6040, with upgrade motors and controller (gecko 540), using Mach 3 and Vectric Aspire.
Would love to know if there’s a lot out there to add ATC capabilities?
We’re considering upgrading to a Camaster in the future (and we really want ATC) but if we could dabble with a DIY add on first that would be awesome.
Found one on eBay here
https://www.google.com/shopping/product/1?q=diy+ATC+router+add.on&client=safari&sa=X&hl=en-us&biw=414&bih=719&tbs=vw:l,ss:44&prmd=sivn&sxsrf=ALeKk03rKphQxjB0FyuflQBHjKfJeOYHwg:159932043 9375&prds=num:1,of:1,epd:439250846674104792,prmr:1,pid: 439250846674104792,cs:1&ved=0ahUKEwijk631rNLrAhUFXa0KHeEsAegQgjYImgk
But not sure if anyone has tried it to make something like this work. Thanks so much Alex
Similar Threads:
Re: DIY ATC add on for 6040 or custom made??
Good luck with the project-please document your progress here as it may encourage others to do the same.
Re: DIY ATC add on for 6040 or custom made??
https://www.cncdepot.net/product-pag...arch-pre-order
Or any number of Chinese ATC spindles starting at around $1600.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
