New Machine Build Home Made CNC Router,


Results 1 to 1 of 1

Thread: Home Made CNC Router,

  1. #1
    Member
    Join Date
    Jan 2017
    Location
    United States
    Posts
    38
    Downloads
    6
    Uploads
    0

    Lightbulb Home Made CNC Router,

    As most that know me, Also know that I am very new to this field, But I enjoy Learning and doing new things,
    I appreciate all the help That I have got from many good guys here on this Site,
    I built a CNC Router about 5 years ago made entirely from wood, Except the Drives and such, and I used this machine to
    Actually build all the Plates and such for my new build,
    This build has a Y-Axis of 39 inches, An X- Axis of 35 inches and a Z-Axis of about 8 inches.
    Nema 34 motors and a 4.7hp Three Phase Variable Frequency Inverter drive. I like to have Never figured out how to program the drive, But I finally figured it out,
    Drive is so quiet you can even hear it run. I still have a couple hours of work to do, Cleaning up all the Wires in Control box and mounting the Z-Axis Limit, And I'm Done.
    Cubby

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Home Made CNC Router,-cnc_1-jpg   Home Made CNC Router,-cnc_2-jpg   Home Made CNC Router,-cnc_3-jpg   Home Made CNC Router,-cnc_4-jpg  

    Home Made CNC Router,-cnc_5-jpg   Home Made CNC Router,-cnc_6-jpg   Home Made CNC Router,-cnc_7-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Home Made CNC Router,

Home Made CNC Router,

Home Made CNC Router,