This is the closest thing I've seen.
Start reading at this post.
https://www.cnczone.com/forums/cnc-w...ml#post1209536
Not sure where to ask this question but the CarveWright system uses a rolling feed system for the Y axis and I was wondering if anyone has made a larger sturdier version themselves? It would be nice to have a machine that took less floor space when not in use. Anyone have advice on things that could be used to make such a system if not.
James.
Similar Threads:
This is the closest thing I've seen.
Start reading at this post.
https://www.cnczone.com/forums/cnc-w...ml#post1209536
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks both, I might try the 3D printed one it could be handy!