Hi Strawb - some pro, some some amateur, but thanks for the praise. Viewers turn your sound down! Here's YaGs first cut. The ply had a small bounce in it, needed better hold down.... will need to learn a bit about its cut, Its different to Scoot-S1 can go deeper and faster... as it should.
The underline is me being anxious and starting at the wrong Z when doing the boundary check, but the rest went well. I thought it was going to be the first divot in the bench...
So the design and build journey has ended. Now we move to the development stage. Dust control, fine alignment. Oh by the way I found that UCCNC can home the A-Axis. So the envelope is 1240x900x153. Next one I'll add 60mm to Z and maybe a little to the 900mm now I can see where things are.... I'll set up a deflection test soon to follow up on how it compares to the FE model.... a little more mano / machine bonding is needed...
https://fb.watch/85oy2Kd0-U/