Trying to find this connector


Results 1 to 15 of 15

Thread: Trying to find this connector

  1. #1

    Default Trying to find this connector

    This is a cable connector that came with my square 1.5Kw spindle. I need to find a replacement connector so I can make a new cable.
    Trying to find this connector-_mg_5317-jpg


    The cable connector connects to the female located on the spindle.
    Trying to find this connector-_mg_5318-jpg


    If anyone knows where I can get this connector, or even what this type connector is called so I can do some searching.

    Similar Threads:
    Author of: The CNC Construction Set Books, the KRMx01, KRMx02, KRmc01, and KRmf70 CNC Books, the HANS Electric gear clock book. All available at www.kronosrobotics.com.


  2. #2
    ericks
    Guest

    Default Re: Trying to find this connector

    I have seen some sold on a chinese site, can't remember atm. Mine i bought recently from Lapp, the guys that supply cable, but the "genuine" good quality one's from Lapp and Rs components are quite expensive.
    Think i paid around $50 AUS, for the complete male and female



  3. #3
    ericks
    Guest

    Default Re: Trying to find this connector

    I just had a look at the Lapp site...here the plug is around $20 AUD, you do have Lapp in America

    Hope this helps



  4. #4

    Default Re: Trying to find this connector

    Link?

    I would pay $20 for the male plug. My other option is to take the original connector off the cable it is on and make dongle that connects to a more common connector.

    Author of: The CNC Construction Set Books, the KRMx01, KRMx02, KRmc01, and KRmf70 CNC Books, the HANS Electric gear clock book. All available at www.kronosrobotics.com.


  5. #5
    Member
    Join Date
    Oct 2004
    Location
    USA
    Posts
    94
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by msimpson99 View Post
    Link?

    I would pay $20 for the male plug. My other option is to take the original connector off the cable it is on and make dongle that connects to a more common connector.
    With a bit of googling...

    https://lappusa.lappgroup.com



  6. #6
    Member
    Join Date
    Apr 2016
    Location
    United States
    Posts
    841
    Downloads
    0
    Uploads
    0

    Default Re: Trying to find this connector

    Try this link: https://lappdigitallibrary.cld.bz/LA...og/301/#zoom=z. It's to the North American catalog (and the site).



  7. #7
    ericks
    Guest

    Default Re: Trying to find this connector

    Looks like you all sorted now



  8. #8

    Default Re: Trying to find this connector

    Looks like it is an HA 4 connector. Searching on Ebay I was able to get four (used) connectors with housings delivered for under $50.

    Thanks again for the help.

    Author of: The CNC Construction Set Books, the KRMx01, KRMx02, KRmc01, and KRmf70 CNC Books, the HANS Electric gear clock book. All available at www.kronosrobotics.com.


  9. #9
    Member jalessi's Avatar
    Join Date
    Feb 2007
    Location
    United States
    Posts
    4553
    Downloads
    1
    Uploads
    0

    Post Re: Trying to find this connector

    Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.


  10. #10

    Default Re: Trying to find this connector

    This looks like a Harting connector, https://www.elfadistrelec.no/Web/Dow...6/04347126.pdf



  11. #11

    Default Re: Trying to find this connector

    I am a industrial electrician by trade and reading people writing that metal connectors do not cause fire makes me wounder where they get this claim from. I have seen die moulded aluminium connectors melted from earth faults, blown wide open from series arcing over time. Sure, I would feel much safer about metal style connectors but saying they do not cause fire is upright wrong.



  12. #12
    Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    6028
    Downloads
    0
    Uploads
    0

    Default Re: Trying to find this connector

    Quote Originally Posted by oscilloman View Post
    I am a industrial electrician by trade and reading people writing that metal connectors do not cause fire makes me wounder where they get this claim from. I have seen die moulded aluminium connectors melted from earth faults, blown wide open from series arcing over time. Sure, I would feel much safer about metal style connectors but saying they do not cause fire is upright wrong.
    Technically, they don't cause fire, the shorting does



  13. #13

    Default Re: Trying to find this connector

    Quote Originally Posted by underthetire View Post
    Technically, they don't cause fire, the shorting does
    Yes, shorting to the metal housing, I just wanted people to know that connectors made with metal housing do at some occations make really hot sparks as well. But sure, if it is on your own hobby mill, and you are not running lights out I would not be afraid to use a noname connector from china.



  14. #14
    Member joeybagadonuts's Avatar
    Join Date
    Jun 2008
    Location
    SoCal USA
    Posts
    467
    Downloads
    0
    Uploads
    0

    Default Re: Trying to find this connector

    wmgeorge,

    I am a master donut maker not a Master Electrician like you and would like to know how you determined the current capacity, internal resistance of the terminals, dielectric material, voltage failure or breakdown rating and thermal properties of the connectors jalessi posted just by looking at a picture and not using any type of test equipment.

    Please educate all of us less informed apprentice hobby electricians that don't have x-ray vision.

    Live from downtown L.A. home of the relentless Cup-O-Joe
    Joey B

    A doughnut a day keeps the doctor away.


  15. #15
    Member
    Join Date
    Mar 2013
    Location
    usa
    Posts
    88
    Downloads
    0
    Uploads
    0

    Default Trying to find this connector

    I work in a power plant, we have metal 480v 3 phase 100amp welding plugs all over the place. They are all metal bodies.
    We also use metal Amphenol plugs on tons of control wires.
    Don’t mangel the pins and make sure you have proper insulation and strain reliefs, metal plugs are fine


    Sent from my iPhone using Tapatalk Pro



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trying to find this connector

Trying to find this connector