2nd Post-Gantry goes out of square - Page 2


Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: 2nd Post-Gantry goes out of square

  1. #21
    Activation process justicedavid65's Avatar
    Join Date
    Sep 2018
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: 2nd Post-Gantry goes out of square

    I kind of worked my way all the way down to motors connected to drives, with nothing in between. This is how I have come to think it's the motor that is the problem.



  2. #22
    Activation process justicedavid65's Avatar
    Join Date
    Sep 2018
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: 2nd Post-Gantry goes out of square

    Finally solved my problem. The problem was, I'm an idiot! I had my ground that daisy chains all of the drivers coming out of +5v instead of ground. All is well now and running great.

    So, all of you that said check the electronics were right!



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

2nd Post-Gantry goes out of square

2nd Post-Gantry goes out of square