got this server case with high flow fan for 10 dollar to fit my controller
some parts already arrive need to recheck everything first before cut all the plate,and checking alu extrusion, looks like they cut the size really perfect within 0.1mm.
and i got vacuum table for size 300*400 around 400usd that i can use air compressor with it no need vacuum
got this server case with high flow fan for 10 dollar to fit my controller
today assembling Y axis rail and allign it together to 0.0001'' and i put some sand in static part(base) still thinking should iput something in moving gantry such as expanding foam to reduce the vibration
Hi Team - Why solve a perceived problem before its a problem? There's lots of routers built out of extrusions and they have no vibration issues so only solve problems that exist.
Plus why have your columns dog legged? The loadpath is from the top to the bearings so this is where material should be. To reduce weight put a hole in it but its best leave edges straight? Peter
today cutting front plate for motor mount work perfectly for my servo
Hi Team - Slow and steady wins most races. Peter
done assembly my gantry,all measurement is accurate to 0.005-0.01mm pretty nervous since its my first time design and making own cnc
and just curious will my 2x 400watt servo can handle my gantry that i calculate around 100kg-120kg total with spindle
making my own nut holder and its pretty accurate and no binding when moving axis and today also installing my Delta 400w servo with brake for z axis im not satisfied with the mount but yeah will improve and integrate with the axis holder together when finish this since i already dissamble all part from old machine
custom spindle holder for easy tramming
done for now
having 2 choice right now regarding belting.. should i go 1:2 for 300 ipm max or 1:1.5 for 400 ipm
Hi Team - that's a serious chunk of aluminium and bolts. Keep at it. Peter
done all wiring tomorrow can start calibrate and im setting Y axis to gantry mode for servo drive to be on same setting since its dual motor axis
everything work well for now i set 400ipm to all axis and 1000 for acc i can set higher but got wobble for my table since i use table with roller
latest picture for my build the atc spindle is used i bought for 800 usd which got good tolerance around 0.004mm by testing using 300mm bar and the weigh tof z axis around 30kg which i use with 400watt servo with 1:2 ratio
That looks pretty good.