Gee... Let me try to guess what control board and software your using? I am thinking really hard and I will get back to you with an answer. Oh I am going to have to try and guess what computer and OS, that might take some more time.
hi all i have an older ooznest ox cnc router table seem to have sorted out most of the mechanical problems but i am having a recurring problem which mite be the control board or software not sure when cutting it will stop when cutting a job and the gcode sender crashes also is there an alternative to gcode sender that will work with my old control board
thanks Dave
Similar Threads:
Gee... Let me try to guess what control board and software your using? I am thinking really hard and I will get back to you with an answer. Oh I am going to have to try and guess what computer and OS, that might take some more time.
1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro
Thats a basic hobby grade board, all in one GRBL. Unless you have a perfect location with clean power, and no EMI it will pick up electrical interference and crash. I had something like that on a blue light diode CNC it ran slow and crashed a lot. Windows 10 is not a good OS for hobby grade systems. Yes you can make it work if you know how, but its not worth the effort. I use Windows 7 Pro on all my machines. There are some control systems made for Windows 10 and they work fine. Acorn is one, do some google searches.
http://www.spark-concepts.com/cnc-xpro-v4-controller/
Acorn CNC controller, Step and Direction 4 axis CNC Control board with ethernet communication.DIY CNC kit
1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro
thanks i will look in to this now I have a rough idea where i am heading now thanks