MY DIY rack clamps

[msimpson99]

Just finished a little piece about my DIY rack clamps.



The write up is here:
Rack Clamps — Kronos Robotics

Similar Threads:

• Helical Rack - would you prefer it to spur rack?
• Cat 40 Tool Holder Rack - Haas, Rack, or Benchtop
• Need parts: Gooseneck & Clip on clamps/screw bar clamps, padded
• anti_backlash rack for rack and pinion
• rack and rack & pinion with off the self planetary gearbox

[jamesobrady]

This page doesn't seem to exist anymore

[msimpson99]

Sorry, I needed to clean the site up a bit, so that page had to go.

Here is a video I did on my fixture.

[jamesobrady]

Sorry, I needed to clean the site up a bit, so that page had to go.

Here is a video I did on my fixture.

Awesome. Thank you for that. Nice plasma cutter. Did you buy or build ?

[msimpson99]

That cut was done with a KRMx02 Plasma conversion. That was done about 2 years ago when I did it as some early experiments. The goal was to create a high quality cut with a downdraft table. Worked like a charm.

Those early experiments led me to my latest set of books called the "CNC Construction Set"
Here the CNCCS is doing its first plasma cut with simple downdraft table and floating head.