My First Router - Page 12


Page 12 of 12 FirstFirst ... 29101112
Results 133 to 137 of 137

Thread: My First Router

  1. #133
    Registered
    Join Date
    May 2003
    Location
    uk
    Posts
    79
    Downloads
    0
    Uploads
    0

    Default Cnc Router Website updated

    Well i am taking the plunge and designing my own website around my homebuilt cnc router and my clockmaking projects.This is going to take up an awful lot of my time so i will be looking at the amount of visitors to my site and any feedback to see how far i should take this thing.

    http://website.lineone.net/~rmtucker/

    I am also hoping to update and give better descriptions of the building of the cnc to help some of the newbies out there.

    Cnc Zone has been a source of invaluable help and encouragement to me and would like to thank all who answered and put up with my dumb questions.

    I would say that i have finished the Cnc except for an operator panel and handwheel.

    Please Remember that the website is under construction and will be changing on a daily basis so your patiance would be appreciated.

    Once again thanks to all and i will still be lurking around the cnc zone every day.

    Regards
    Mark

    http://www.weardalecnccarving.co.uk


  2. #134
    Gold Member chuckknigh's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    598
    Downloads
    0
    Uploads
    0

    Default

    Looks good, and I would like to see more about the Congreve clock you have shown. The history page just displays the word "History." :-) Of course, I'm a clock nut.

    It looks like a very good beginning to a very good site.

    Say, how did you engrave that rock? Did you design a toolpath to follow its contours? It looks like you followed the surface down the "step."

    -- Chuck Knight



  3. #135
    Registered jeffs555's Avatar
    Join Date
    Jun 2004
    Location
    United States
    Posts
    463
    Downloads
    0
    Uploads
    0

    Default

    Mark,
    I am also quite interested in your clock. I knew about Congreve's rockets because you launched them against us nearly 200 years ago :-) but didn't know he invented a clock. I looked up his clock, and it is a most interesting design. I had never heard of a rolling ball clock before. It must be interesting to watch one in operation. I will eagerly watch your progress on your web site.

    Jeff



  4. #136
    Registered
    Join Date
    May 2003
    Location
    uk
    Posts
    79
    Downloads
    0
    Uploads
    0

    Default Website Updated ?.

    Hi Guys

    Just follow the congreve project links on my website to see progress on the congreve clock.

    http://website.lineone.net/~rmtucker/

    Regards
    Mark

    http://www.weardalecnccarving.co.uk


  5. #137
    Registered
    Join Date
    May 2003
    Location
    uk
    Posts
    79
    Downloads
    0
    Uploads
    0

    Thumbs up I found a use for my Router at last

    Hi guys

    I have found a use for my cnc router at last,Go to my web page at:-
    www.weardalecnccarving.co.uk
    in the march and april sections of the vwtrike build.

    It may not look much at the moment but when i start on the engraving,the yokes and anything else i can fit on the machine will be covered.
    It May give someone some ideas.

    Regards
    Mark

    http://www.weardalecnccarving.co.uk


Page 12 of 12 FirstFirst ... 29101112

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

My First Router

My First Router