Removing feed-thru punch from wood die board?


Results 1 to 4 of 4

Thread: Removing feed-thru punch from wood die board?

  1. #1
    Member
    Join Date
    Aug 2014
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Removing feed-thru punch from wood die board?

    I'd like some advice on how to remove a broken feed-thru punch from a wood die board. The punches are only 1/16" thick so there's not much steel to press against when pressing it out. I'm new to this and wanted to get advice on what the standard procedure is before I try pressing them out with some sockets.



    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    4252
    Downloads
    4
    Uploads
    0

    Default Re: Removing feed-thru punch from wood die board?

    Need photo - it does not appear.

    Cheers
    Roger



  3. #3
    Member
    Join Date
    Aug 2014
    Posts
    35
    Downloads
    0
    Uploads
    0

    Default Re: Removing feed-thru punch from wood die board?

    Removing feed-thru punch from wood die board?-broken-punch-jpg

    Attached Thumbnails Attached Thumbnails Removing feed-thru punch from wood die board?-broken-punch-jpg  


  4. #4
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    4252
    Downloads
    4
    Uploads
    0

    Default Re: Removing feed-thru punch from wood die board?

    Um ...
    What's not visible is how far it is sunk into the timber. That matters.

    Frankly, just looking at it, I would GUESS that brute force and a hammer might be how I would try. Sorry about that.
    Unless of course you can fit a tight mandrel inside it and then apply a bit of torque?

    Cheers
    Roger



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Removing feed-thru punch from wood die board?

Removing feed-thru punch from wood die board?