386 lndustrial mother board


Results 1 to 3 of 3

Thread: 386 lndustrial mother board

  1. #1
    Member Chucksue's Avatar
    Join Date
    Mar 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default 386 lndustrial mother board

    My CNC mill uses a 386 mother board. It stops at the second screen describing the 386 mother board. Then sometimes it will complete the boot and run a milling program. It is an Anilam 1100. Give me some help!

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: 386 lndustrial mother board

    ...before you do anything I suggests backing up the Config File(s) Step 7
    Series 1100 trouble shooting guide

    DJ



  3. #3
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: 386 lndustrial mother board

    That is a 25 year old system. Why not upgrade it to a modern control? There are a number of relatively inexpensive options available today. I would look at Dynomotion or Centroid products.

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

386 lndustrial mother board

386 lndustrial mother board