I use a GTX970 and Fusion is very fast with my i7-5820K.
Hey guys I'm looking at getting a new desktop to replace my outdated one and one thing I'm stuck on is graphics card. I was originally set on the AMD FirePro w4100 or Quadro k670 (I think that's the model) but I mainly use Autodesk Fusion 360 and after some research I'm not sure if those would be the best for my budget. I would also like to do some minor video editing but f360 will be the main use
PC I'm about set on will likely be a dell Inspiron 3847 with i7 4790 processor and 16gb ram
Similar Threads:
- Problem- Graphics Card
- Need Help!- graphics card
- Which Graphics Card?
- Graphics Card & X4
- Graphics Card
I use a GTX970 and Fusion is very fast with my i7-5820K.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I also have the GTX970 from sapphire, just under $200 when I bought it. Seems to handle everything I've thrown at it.
Sent from my A3-A20FHD using Tapatalk
I think mine is an MSI. Don't recall exactly which model, as I bought it 18 months ago (for $400).
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Well I ended up getting a MSI GeForce gtx 960 2gb for right at $150 shipped which is about what I wanted to spend on one. hopefully it will be a decent card for what I do, I will know I'm a couple days. If nothing else it sure does look awesome!
My laptop has a 960M with an i-7, and it's not bad with Fusion.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)