uc100 controller board


Results 1 to 4 of 4

Thread: uc100 controller board

  1. #1
    jeffcrary's Avatar
    Join Date
    Dec 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default uc100 controller board

    I have a CNCEST (CHINA) USB ROUTER ENGRAVE 4AXIS THAT NEEDS : LICENSED, DOWN LOADED,and setup and then test the
    motors But there is no movement from the motor. I've check mach3 plugin, went back into download program to make
    sure the Parallel port was off and still the UC100 Motion Controller Board little red light is blinking, therefore no communication is getting throw to the parallel port. Can someone give me am idea on this trouble I'm
    having



  2. #2
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: uc100 controller board

    Quote Originally Posted by jeffcrary View Post
    I have a CNCEST (CHINA) USB ROUTER ENGRAVE 4AXIS THAT NEEDS : LICENSED, DOWN LOADED,and setup and then test the
    motors But there is no movement from the motor. I've check mach3 plugin, went back into download program to make
    sure the Parallel port was off and still the UC100 Motion Controller Board little red light is blinking, therefore no communication is getting throw to the parallel port. Can someone give me am idea on this trouble I'm
    having
    Do you have a genuine Mach3 download and License and a genuine UC100 if they are from China then they may not work

    Check Mach3 Plugins to see if the UC100 is in there

    Mactec54


  3. #3
    Member BriggTrim's Avatar
    Join Date
    Aug 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: uc100 controller board

    Hi..Recently I bought a UC100 USB motion controller and trying to figure out how it works. Only to find out I never got the info off the company I bought it off now there gone.
    Any help much appreciated



  4. #4
    Member
    Join Date
    Nov 2013
    Posts
    4646
    Downloads
    0
    Uploads
    0

    Default Re: uc100 controller board

    Hi,
    there are dozens of Chinese rip-off UC100's on Ebay, Amazon and all over the place. They are not a patch on the real CNCDrive made UC100's.

    The genuine UC100 REQUIRES a manufacturer supplied plugin in order to run Mach3. If you don't have the plugin then you need to get it from CNCDrive.
    The plugin will fail if your board is not genuine.

    Craig



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

uc100 controller board

uc100 controller board