Looks a little like a Gecko G250? Maybe an old version?
Hi All,
Hopefully someone can help. I have an old CNC, installed I think by Machinetoolcamp back in '06 its running deskcnc with a 2nd gen lmservices control board. However the z axis controller for the step-syn drive popped a cap. I can not find any markings on it to help identify it to replace it.
Does anyone know which controller this is or possible could direct me to a replacement that would be usuable?
Thank you all in advance.
Dennis
Similar Threads:
- New Machine Build- Arduino 2560 + Mach3 Controller + TB6560 4 Axis 3.5A Stepper Driver Board Controller
- 5phase stepper which controller board should i get???
- Mini Manual Controller For 3 Axis CNC Stepper Board
- Does anyone know of a controller board for synchronized stepper motors
- Looking for controller board for synchronized stepper motors
Looks a little like a Gecko G250? Maybe an old version?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)