DeskCNC software error


Results 1 to 2 of 2

Thread: DeskCNC software error

  1. #1
    Registered
    Join Date
    Mar 2015
    Posts
    2
    Downloads
    0
    Uploads
    0

    Unhappy DeskCNC software error

    Hi I was wondering if someone could point me in the right direction. I have a DIY CNC and run DeskCNC. It's been a couple of months since I used it, and now all of a sudden I developed a problem. When I go to run DeskCNC it comes up with an error on startup. When opened it goes through the normal starting process, saying it has detected the controller but then says 'command timed out'
    I thought this was a connection problem and after changing the serial cable and re-installed DeskCNC, I thought it must have been the serial port on my computer. After changing the computer and reinstalling the software again the problem is still there, arrrrrr, pulling my hair out so any help to fixing this problem would be very appreciated.
    I have a project I really need to get done ASAP, so can someone please help.

    Thanks Annie

    Similar Threads:


  2. #2
    Member zed1's Avatar
    Join Date
    Oct 2020
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: DeskCNC software error

    Hi Friend,

    I have this exact same problem now, any luck solving it?

    Thanks,
    Sean



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DeskCNC software error

DeskCNC software error