ALARM 751 Spinlde 1 alarm detect (AL-31)

[sputnikprec]

Default GILDEMEISTER CTX 400 x 18T Fanuc Control SPINDLE PARAMETERS

Have a Gildemeister CTX 400F machine x 2 axis and lost all the parameters in the machine. I managed to put them all in, however the spindle turns and stops immediately.
I am getting Alarm 751 and Al 31 on the drive. I have a wrong parameter the spindle 1.... maybe the machine got a multi-spindle configuration....

I need the spindle parameters or if anybody has a similar machine and could give me a copy I would be most obliged. I do not think that this is not a keep relay parameter issue.

Similar Threads:

• Problem- (ALARM 414 SERVO ALARM) Y-AXIS DETECT ERROR?
• Need Help!- Alarm 414 Servo Alarm : Y axis detect error
• Need Help!- 751 spindle alarm (AL-30)
• Need Help!- 750 ALARM SPINDLE-1 ALARM DETECT (AL11)
• Need Help!- 751 alarm AL-12 FANUC 18-M

[alexfanuc]

Default GILDEMEISTER CTX 400 x 18T Fanuc Control SPINDLE PARAMETERS

Have a Gildemeister CTX 400F machine x 2 axis and lost all the parameters in the machine. I managed to put them all in, however the spindle turns and stops immediately.
I am getting Alarm 751 and Al 31 on the drive. I have a wrong parameter the spindle 1.... maybe the machine got a multi-spindle configuration....

I need the spindle parameters or if anybody has a similar machine and could give me a copy I would be most obliged. I do not think that this is not a keep relay parameter issue.

What kind of spindle unit do you have. Do you have the FANUC part number?

regards

Alex Fanuc

[sputnikprec]

The machine motor is Fanuc 30P spindle motor A06B-0730-B200#3000
The drive is a spindle servo unit A06B-6064-H318#H550 and there is a label A06B-6064-C322
many thanks for your reply.

[sputnikprec]

I would like to tell you that it is fixed. The spindle parameters I had were incorrect.

[sputnikprec]

Hi ALexFanuc,
the machine is fixed. I got new parameters from Fanuc UK for the control and spindle and it is now sorted. I thank you just the same because you have tried as well. Thank You!

[alexfanuc]

Great! Thanx for your reply!