Deckel FP3NC Tool Holders?


Results 1 to 2 of 2

Thread: Deckel FP3NC Tool Holders?

  1. #1
    Member beltdrop's Avatar
    Join Date
    Apr 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Deckel FP3NC Tool Holders?

    I need some new tool holders. They are 40 taper and the "retention knob" is part of the holder (one piece). There is a groove in the OD of the "retention knob" that 4 fingers grab to pull into the taper. Anyone know where I can find some holders? I need a 1" end mill holder.

    Similar Threads:


  2. #2
    Member beltdrop's Avatar
    Join Date
    Apr 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Deckel FP3NC Tool Holders?

    ANswering my own question for the sake of others who may have trouble finding them:

    Regular CAT40 holders will work with this pull stud: https://www.maritool.com/p1621/Pull-...duct_info.html
    One piece holder: https://webshop.tungaloyamerica.com/.../product/81047



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Deckel FP3NC Tool Holders?

Deckel FP3NC Tool Holders?