MAHO MH400E retrofit to LinuxCNC

[RotarySMP]

I summarised the retrofit of my MAHO MH400E in video here:


The Github wiki describes the gearbox control module a friend programmed for me:
https://github.com/jin-eld/mh400e-linuxcnc/wiki
Mark

Similar Threads:

• Build Thread- Holzma HPP 11/43 Beam Saw Retrofit LinuxCNC
• LED Ring light for the MAHO MH 400E - LinuxCNC converted.
• LinuxCNC - Mesa - LagunMatic 310 Retrofit
• Maho MH400E retrofit to Mach3
• Is a Maho MH400E with Philips 432 a good buy ?

[einarak]

Great job!