Problem E5 error millplus control


Results 1 to 1 of 1

Thread: E5 error millplus control

  1. #1
    Member
    Join Date
    Oct 2016
    Location
    United Kingdom
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default E5 error millplus control

    Hi all, I have a deckel with a millplus V520 control.

    This was out in estop for the weekend. Taking out of estop and enabling the machine I have an E5 error. This points to overloads on the coolant system but all OK. How do I see what's bringing this alarm. Below items have checked out OK. (item 2 not found in schematics)

    E 5 Breakdown coolant/chips transfer
    Symbols:
    1) IX_KM_NEG_MSS_SSA=0

    2) IX_KM_NEG_MSS_Stoerung=0

    3 IX_KM_NEG_MSS_KSA=0

    Similar Threads:


  2. #2
    Member wardygb's Avatar
    Join Date
    Oct 2018
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: E5 error millplus control

    Proximity switch on the swarf conveyor :-)



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

E5 error millplus control

E5 error millplus control

E5 error millplus control