Maho MH800 C - English Manual and documentation

[afshin1978]

Hi everyone!

We just bought a MH 800C from 1991 but I couldnt find any English manual for it.
Can anybody help me with that? my email: afshinamigh@gmail.com

Than You in advance.

Similar Threads:

• documentation for maho 400p
• Manual Maho 1200s and Maho 1600s
• Need Help!- MAHO HS300E sinking erosion machine ENGLISH MANUAL
• Maho MH800 E2, Machine Constants needed

[Burgs]

Hi
How did you go with the manual and which one did you need, operational or technical?
I also have a 1991 MH800C with manuals but it would take a fair amount of work to scan and send them, so hoping you have been able to find some.

Burgs

[afshin1978]

Hi,
It took me almost a month to translate just one of the manuals!
Do you have AUSBILDUNGSUNTERLAGEN (TRAINING DOCUMENTS) in English? Its about 148 pages.
If not, how about "BEDIENUNGSANLEITUNG" (Operation Manual)
Thanks in advance

Afshin

[Burgs]

Hi
I will have to check what I have, there is some training information on operating the MH880C and another smaller separate manual that could be training but I have not looked at them for some time,.
I will have a look, and see if I can find them, might take a few days as I have them in a shipping container while house is being renovated.

Burgs

[afshin1978]

Hi
I will have to check what I have, there is some training information on operating the MH880C and another smaller separate manual that could be training but I have not looked at them for some time,.
I will have a look, and see if I can find them, might take a few days as I have them in a shipping container while house is being renovated.

Burgs

I forgot to mention the Controller is Philips 532

[Burgs]

Hi
Mine is the 432 controller so not sure it would be any use?
Burgs

[afshin1978]

Hi
I heard most of it is the same.
Afshin

[Burgs]

Ok is your machine a goer?
If I find the manuals what will be the next step, where are you located?

[Burgs]

Hi Afshin where are you located?
I located the manuals today but didn't look at what they are when you said your controller was a 532.
The manuals I have are in English.

Burgs.

[kojaze]

[QUOTE = Burgs; 2386418] Bok Afshin, gdje se nalaziš?
Danas sam pronašao priru?nike, ali nisam pogledao koji su oni kad ste rekli da je vaš kontroler 532.
Priru?nici koje imam su na engleskom jeziku.

Burgs. [/ QUOTE]

https://www.heidenhain.com/en_US/software/

[DorNor12]

Hi
I have a Deckel Maho 800c . It was disconnected from the power 7 years ago. Do you think I still can run it ? Or I have to set new parameters?