LED Ring light for the MAHO MH 400E - LinuxCNC converted.


Results 1 to 3 of 3

Thread: LED Ring light for the MAHO MH 400E - LinuxCNC converted.

  1. #1
    Member RotarySMP's Avatar
    Join Date
    Mar 2004
    Location
    Vienna, Austria
    Posts
    1306
    Downloads
    7
    Uploads
    0

    Default LED Ring light for the MAHO MH 400E - LinuxCNC converted.

    Hi Guys,

    I wrote a "how to " capturing what I did to convert my MAHO MH400E to LinuxCNC with a Gmoccapy optimised control panel. One of the guys on the german language forum, Hanno, used parts of that haow-to, to do his conversion, and sent me a LED ring light he designed and made for the MAHO. This is a video of the installation...



    Mark

    Similar Threads:
    Regards,
    Mark


  2. #2
    Member
    Join Date
    Dec 2012
    Location
    belgium
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: LED Ring light for the MAHO MH 400E - LinuxCNC converted.

    Hi Mark,

    I was starting to read the thread from your retrofit Maho 400 E.
    I can only find a summary. Does the hole thread exist any more ??

    Kindly regards
    jp



  3. #3
    Member RotarySMP's Avatar
    Join Date
    Mar 2004
    Location
    Vienna, Austria
    Posts
    1306
    Downloads
    7
    Uploads
    0

    Default Re: LED Ring light for the MAHO MH 400E - LinuxCNC converted.

    The whole thread can be found on the LnuxCNC forum here:
    https://forum.linuxcnc.org/12-millin...86-maho-mh400e

    Enjoy.
    Mark

    Regards,
    Mark


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

LED Ring light for the MAHO MH 400E - LinuxCNC converted.

LED Ring light for the MAHO MH 400E - LinuxCNC converted.