DMG DMC103V 840D Z axis work offset is locked how to unlock?


Results 1 to 2 of 2

Thread: DMG DMC103V 840D Z axis work offset is locked how to unlock?

  1. #1
    Member
    Join Date
    Oct 2006
    Location
    US
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default DMG DMC103V 840D Z axis work offset is locked how to unlock?

    Im trying to set the work offset on this machine. The DMC implementation of the WCS on this control is really different than whats in the Siemens manual and also very different from my DMG DMC manual that came with the machine, almost looks like it for a different machine or control.

    In machine screen, I can go to scratch then press "Z0 base", which I assume is G53 the settable offset. I was able to reset x and y to zero at the work offset but not z.

    Is there some trick not described in regular manuals that you need to do on a DMG DMC siemens machine to set the Z offset? I assume that if I set one tool to the work offset position, they will all be set correctly as they are all referenced to the height of the laser measurement system at their tip.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails DMG DMC103V 840D Z axis work offset is locked how to unlock?-img_5644-jpg  


  2. #2
    Member kurmay's Avatar
    Join Date
    Aug 2011
    Location
    Haiti
    Posts
    290
    Downloads
    1
    Uploads
    0

    Default Re: DMG DMC103V 840D Z axis work offset is locked how to unlock?

    Enter password for higher access level

    "Imagination is more important than knowledge."


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DMG DMC103V 840D Z axis work offset is locked how to unlock?

DMG DMC103V 840D Z axis work offset is locked how to unlock?

DMG DMC103V 840D Z axis work offset is locked how to unlock?