DECKEL 100V Gear at wrong position.


Results 1 to 2 of 2

Thread: DECKEL 100V Gear at wrong position.

  1. #1
    Registered Deckard51's Avatar
    Join Date
    Aug 2013
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default DECKEL 100V Gear at wrong position.

    Hello colleagues ! I have some problem with my DECKEL 100 V CNC Milling machine. While I manipulate the axis manually, machine can stop and error appears - GEAR AT WRONG POSITION. Also It can appears while the machine do nothing. In the program running mode it never happen. I can not find this failure in users manual.
    What does it means? Where I need to search the problem? Does anybody know?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails DECKEL 100V Gear at wrong position.-20190201_153634-jpg  


  2. #2
    Registered
    Join Date
    May 2016
    Location
    United States
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: DECKEL 100V Gear at wrong position.

    Not sure I can help but can give you some generic info. First I want to say that Deckel you have (like most Deckels) is a pretty cool looking machine.

    Ignore this if you don't have a two or three speed geared head, or any gearboxes on your machine.

    I'm thinking that a sensor or position switch that verifys a successful gear change (possibly labeled CS1) located on or around the gearbox, has gone slightly out of adjustment or has a loose wire causing it to become intermittent.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DECKEL 100V Gear at wrong position.

DECKEL 100V Gear at wrong position.