Maho MH 800 C - Lost machine constants Philips 432


Results 1 to 3 of 3

Thread: Maho MH 800 C - Lost machine constants Philips 432

  1. #1
    MKU's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Maho MH 800 C - Lost machine constants Philips 432

    Hello!
    We are having problems with our machine after it had been disconnected from power and moved. The backup battery for the machine constants was almost dead and I replaced it, but the machine constants are gone...

    Does anyone have a list/backup of the machine constants for a MH800 C with Philips 432 controller?

    Version NR. 6702.703/3



  2. #2
    Registered
    Join Date
    Mar 2007
    Location
    USA
    Posts
    63
    Downloads
    0
    Uploads
    0

    Default Re: Maho MH 800 C - Lost machine constants Philips 432

    MKU,
    I have a constants list for 603 level software. It should get you close but you may have to enter some manually.
    If you want them send me an email address.



  3. #3
    MKU's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I've sent you my email address,



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Maho MH 800 C - Lost machine constants Philips 432

Maho MH 800 C - Lost machine constants Philips 432