Help me friends. Naw I have a new problem... My tool changer do not work... When I put (for example) T6M6 the tool make number 6 of monitor but the tool changer dont do anything...
I notice that I can not set values for the tools... When I am in MANUAL and put the button TOOL MEM, I put values for T-enter, L-enter, R-enter and P-enter, after that I put store or start buton but nothing changes. Top of the right side of the tool display I have a caption LOCK. This makes me think that something I am not doing right or a constant forbids me to touch in tool memory?
The other is head. I can not rotate it. When I put M53 (I think that this si comand for rotate from vertical to horizontal spindle) Y and Z axes go in position 0 and some air clamp open and machine give me error I311 (werkzeugtraeger ausgefahren 0-signal) and the air do not stop until I restart the machine. I see that in the horizontal head, the jammer of the instrument is open everytime and my button TOOL UNCL. do not work...
This is also the reason the tool changer does not work or I do not know.
The machine is maho mh700s with philips 432 control with automatic rotate head.

Similar Threads: