Need Help! Maho MH600E transfer program


Results 1 to 6 of 6

Thread: Maho MH600E transfer program

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    Czech Republic
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Maho MH600E transfer program

    Hello,


    I know a similar topic is already here. I have an older version of the Maho MH600E. I can not send the program to my machine.


    I tried various conneCNC and CademLite programs. When the program is uploaded, the D43 errors are erupted - invalid memory selected, D32- Parity error, D33- word length error, D42- Baudrate and recording is stuck on 21 lines.


    I have made a full Handshake cable about 5m long.


    I have a machine constant


    N771 C1
    N772 C3
    N773 C30
    N775 C1
    N776 C600
    N777 C600
    N796 C0

    I do not know the advice anymore

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Maho MH600E transfer program-nastaveni-jpg   Maho MH600E transfer program-maho-600e2-jpg  


  2. #2
    Registered
    Join Date
    Jul 2016
    Location
    Denmark
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Maho MH600E transfer program

    I have the same problem with my maho 600e, it stops the transfer after 6 lines..



  3. #3
    Registered
    Join Date
    Jun 2017
    Location
    Czech Republic
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Maho MH600E transfer program

    Problem solved. I gave a handshaking cable and it's ok.
    DNC software program and code editor for easy RS232 CNC file transfer 60 day free trial



  4. #4
    Registered
    Join Date
    Jul 2016
    Location
    Denmark
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Maho MH600E transfer program

    I did not understand that ? You gave a handshake cable ?

    Can you maybe send the pinout from the cable you use ?



  5. #5
    Registered
    Join Date
    Jun 2017
    Location
    Czech Republic
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Maho MH600E transfer program

    I use cable Full Handshake, see link
    Http://www.smoregrava.net/Maho/mahomh500.htm



  6. #6
    Member
    Join Date
    Nov 2013
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Pepa44 View Post
    Hello,


    I know a similar topic is already here. I have an older version of the Maho MH600E. I can not send the program to my machine.


    I tried various conneCNC and CademLite programs. When the program is uploaded, the D43 errors are erupted - invalid memory selected, D32- Parity error, D33- word length error, D42- Baudrate and recording is stuck on 21 lines.


    I have made a full Handshake cable about 5m long.


    I have a machine constant


    N771 C1
    N772 C3
    N773 C30
    N775 C1
    N776 C600
    N777 C600
    N796 C0

    I do not know the advice anymore
    Hello,
    I have the same problem with my machine MH600E. Can I use these parameters you wrote here, as well as the cable sheme you posted via link? Which program should I use on my PC for sending G code to my machine?
    Regards..



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Maho MH600E transfer program

Maho MH600E transfer program

Maho MH600E transfer program