Hi
Just for info, I have now all my manuals I need !
Hi
I just got a Maho 500W but I am missing sum English manuals, User and operation guide + the programmer.
The machine had claret all the machine parameter due to a defect 6V backup battery, after replays I enter all the parameter manual in it to forever, is it passably to upload the machine parameter over the serial port ?
I have XYZ axis up and running and can run a ref, but the B axis roundtable is not moving.
I hear a lot of noise from the hydraulic pump when moving the B axis, any ide on this ?
Similar Threads:
Hi
Just for info, I have now all my manuals I need !
Hello,
Sorry for not responding, but I've had problems with logging on to the forum!
Yes, I have manual in English and in PDF format.
Please send my a private message with your email and we can take it from here.
\ F45CNC
F45 hi!!!
PLZ i need manuals for Maho Philips CNC 532.Can you send it to me?
F54CNC !!
PLZ i need manuals for Maho Philips CNC 532.Can you send it to me?
danny.baston@gmail.com
thanks
I have the same machine - Maho 500W.
Does anyone know the value of this machine, I am looking to sell it.
Im looking for the same manual in english.
Can someone send it?
carlosdanielgaray911@gmail.com
thanks
Hi F45,
Please can you send me manual for Maho 532 in PDF format .
I would really appreciate that.
Here is my email spopadic@sbb.rs
Best regards
Sinisa Popadic
Hi F45CNC
Did you somehow figure out how to load the parameters through the serial port.
I have the manuals, but cant figure out how to input them in the machine
Any help will be appreciated
Thanks
Tommie Prinsloo
South Africa
Hello guys. I have got lathe with philips 3580 cnc, and I started thread on the other forum about all philips controls.
We have some manuals and pc connection tips there. But we have no info about 532. And it differes from 432 etc. And people asking.
If you can help, please send me info.
parameters. manuals, correct serial port wiring and tips about pc connection.
I will translate it for our community.
Thanx in advance.
Shabanov.p@gmail.com
our factory purchased Deckel Maho MC600U there is no manual on the parameters on CNC 532 Philips could you send us in electronic form
akulan@354gmail.com Dnepr Ukrain
Alexandr Kulina
deckel maho mc600u ????? ?????????
akulan354@gmail.com
Need help with the parameters of deckel maho MC600U
x, y, z optical rulers
rotary table, spindle, tools encoders
TYPE (0-1= M, 2-3= S, 4-6 =A, 7= HW, 8-10= A- SI )
I think this is for each axis what to choose
akulan354@gmail.com
Hi,
I have got Deckel Maho MC 800 V Philips 532 CNC Machine. I need Machine parameters and manual machine book.
Could you help me? Please.
tunahanacar@live.com
Hi
I need english user manuals Maho 1600s CNC 532.Can you send it to me?
mohsen.shahbazi1363@gmail.com
Tanx
Hi
I need english user manuals Maho 1600s CNC 532.Can you send it to me?
mohsen.shahbazi1363@gmail.com
Tanx
Hi my friends, l have a macho grazino lathe machine with pilips532control, parameter of this was deleted and need to help , can you send me off catalogs of 532control (English)and parameter & error description
h_rahbar56@yahoo.com
Thanks for your helps.