Ladder logic


Results 1 to 5 of 5

Thread: Ladder logic

  1. #1
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Ladder logic

    I need a ladder logic & bit map for an Allen Bradly that would work on a Deckle FP4NC. The place it came out of had an Anilam control retrofit done to it. The Allen Bradley has been removed from it & I will need to reprogram it as the program was not saved to the Anilam pc. Any ladder for an FP4NC would be great as it should be close to what we need. We can tweek it as needed after the reinstall.

    Similar Threads:


  2. #2
    Registered imp22b's Avatar
    Join Date
    Jul 2005
    Location
    USA
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default

    What type of PLC is it? I might be able to help but I need more info.



  3. #3
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    We do not have one yet, but I think we where going to pick up a Siemens.



  4. #4
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    23071
    Downloads
    0
    Uploads
    0

    Default

    Was Allen-Bradley CNC originally fitted to this machine? I believe they are a German made machine, so you may find one with a Siemens PLC to copy.
    Although if you have a current preference and knowledge of some other make of PLC, it may be more efficent to change over, especially if you have to buy the programming software.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  5. #5
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    The machine originaly had a 3m dialog 2. The machine was retro fitted by HUFF mnfg. in the mid 90's to an Anilam 1400. The retrofitter installed an Allen Bradley slc500. When the machine went to auction, they removed the Allen Bradley. I called down there & it has since been used in another machine & the program has been lost.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Ladder logic

Ladder logic