DMU 70V


Results 1 to 2 of 2

Thread: DMU 70V

  1. #1
    Registered
    Join Date
    Mar 2006
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default DMU 70V

    Very new to these machines, I need to drill a angled hole at 45 degrees (looking down the Y axis) what angles do I need to spin the table to in the B and C axis to achieve the 45 degrees, control is Heid 426.

    Thanks



  2. #2
    Registered
    Join Date
    Jul 2007
    Location
    USA
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Bromy View Post
    Very new to these machines, I need to drill a angled hole at 45 degrees (looking down the Y axis) what angles do I need to spin the table to in the B and C axis to achieve the 45 degrees, control is Heid 426.

    Thanks
    I can't help you, but came here looking along the lines for the same thing. I'm trying to find a calculator for figuring out different angles for this same machine.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DMU 70V

DMU 70V