deckle maho E10 trouble

Results 1 to 3 of 3

Thread: deckle maho E10 trouble

  1. #1
    wangwangwang's Avatar
    Join Date
    Apr 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Post deckle maho E10 trouble

    hi
    I have a trouble with machine. it can not be started after made a change of the tool. the error code "E10 input spindle/feed halt 0-signal"display on the screen.and about ten minutes later,the machine could be restarted again. I have no idea with it. so I should ask for help to solve the problem.



  2. #2
    Member
    Join Date
    Sep 2008
    Location
    Romania
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Re: deckle maho E10 trouble

    I have a similar problem with my Maho. If i let the machine on stand by for a few minutes , then it freezes and if try to give a command it displays E10 error. I am having an engineer next week to lock at the machine and then I will let you know.



  3. #3
    Member
    Join Date
    Sep 2008
    Location
    Romania
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Re: deckle maho E10 trouble

    So E10 is an alarm from the PLC when a working condition is not met like door limit switches or in my case because the coolant tank was overflowing.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

deckle maho E10 trouble

deckle maho E10 trouble