Hello
On my homepage www.industrielle-it.com, you can download CimcoFTP.
If you give me your data, I can generate a test key for you.
Most Dialog 112 can communicate over the network.
With the program we can test it together..
Regards Andres
Hello everybody
I am currently looking for a solution for the date exchange from the PC (Windows XP) to the milling machine (Deckel / Maho). The machine has a Dialog 112 controller.
I already looked through the whole forum but I couldn’t find anything useful:
I have the following questions:
1) What programs are suitable for the data exchange and where can I get it from?
2) How does the connection plug arrangement needs to be or are there finished cables?
3) What parameter do I need to set on the machine?
I would really appreciate if anybody can help me out =)
Hello
On my homepage www.industrielle-it.com, you can download CimcoFTP.
If you give me your data, I can generate a test key for you.
Most Dialog 112 can communicate over the network.
With the program we can test it together..
Regards Andres
Andreas Poggel - industrielle IT<br />Wuppertal<br /><a href='http://www.industrielle-it.com' target='_blank'>www.industrielle-it.com</a><br />
Most Dialog 112 can communicate over the network
If they have a network card ....
Regards
Sven
You can use the program Hyperterminal for example.
I don’t know how you need to arrange the plugs; it should be described in the brochure that comes with the Dialog controller.