NEED HELP PUMA 2100 M WONT MOVE IN Z+

[DANIEL HALL]

i have a puma 2100 m was working fine we shut it down and 2 days later when i turn it on the machine won't move in z +
on handle x moves normal z moves in minus (-) direction but not plus (+)
on home selection x go home z doesn't move
on mdi the machine moves and even sent it to home in z

i do not get any alarm , when i move the handle in manual z value does not move but shows an (I) next to de numbers

any idea what can cause this problem

thanks

Similar Threads:

• A 2100 wont boot
• VMC 1000 Acramatic 2100 wont recognize the tools
• Feedback/Reviews of Puma 2100
• Need Help!- X,Y,Z wont move

[DANIEL HALL]

Problem solved one of the ends of the tool prove was stock

[dhardt]

The letter "I " is for Interlock.
Compare the G130.1/2/3/4/5/67 and G8.0 coils.
Whichever is off during the movement request holds the answer to "why?" in its rung(s)...